Alumni ASD

Alumni 2019

Ayush Jain MSc EngD

Project with Punch Powertrain Nederland, the Netherlands Title project: Tribological Investigation of Polymeric Shift Fork Contact Pad

Abhishek Sharma MSc EngD

Project with Valeo Schalter und Sensoren GmbH, Germany Development and Validation of Advanced Target Analysis for a Longitudinal Controller

Gürbey Ҫeken MSc EngD

Project with Valeo Schalter und Sensoren GmbH, Germany Development and Validation of Lateral Control Strategies after Exiting the Highway

Sergio Fajardo Quintero MSc EngD

Project with DAF Trucks N.V., the Netherlands Enabling Simulation Technologies for On-Board Diagnostics Development

Sina Sarneizehdoost MSc EngD

Project with VDL-ETS, the Netherlands Data driven Modelling and Control System Design for the HVAC System of an Electric City Bus – improving Driving Range and Comfort

Mohammad Sadegh Ariannazar

Project with DAF Trucks N.V., the Netherlands Single-Cylinder to Multi-Cylinder Engine Performance Simulation Framework

Alumni 2018

Bilgehan Bayar MSc EngD

Project with Valeo Schalter und Sensoren GmbH, Germany. Title project: Advanced Adaptive Cruise Control System.

Sharad Bhadgaonkar MSc EngD

Project with Valeo Schalter und Sensoren GmbH, Germany. Title project: Advanced Lateral Control System

Konstantinos-Alexandros Fragkakis MEng EngD

Project with Punch Powertrain Nederland B.V., the Netherlands. Title project: Framework Development for the feasibility Analysis of a permanent Magnet Machine Drive System.

Davide Occello MSc EngD

Project with VDL Enabling Transport Solutions, the Netherlands. Title project: E-Bus Multi-zone Thermal Management System Design.

Ir. Anshuman Singh EngD

Project with Punch Powertrain Nederland B.V., the Netherlands. Title project: An Optimization Framework for Hybrid Transmissions.

Ir. Akshay Vaidhiyanathan EngD

Project with DAF Trucks N.V., the Netherlands. Title project: SCE2MCE – Framework towards Multi Cylinder Performance Prediction.

Ir. Raymond Wouters EngD

Project with STORM Eindhoven, the Netherlands. Title project: Preliminary Design of the Smart Bus Concept; Design and Simulation of a Concept for an Inter-City Bus Rapid Transit System.

Alumni 2017

The technological designer's program Automotive Systems Design organized a diploma award ceremony for the fifth generation of graduated technological designers on October 31, 2017. During a symposium all graduates presented their project results to the automotive industry, partners, supervisors from TU/e and industry, family and friends. In the afternoon the graduates received their diploma and the day was concluded with a dinner.

Sapfo Tsoutsou MSc EngD

Project with DAF Trucks N.V. Eindhoven, the Netherlands Title presentation: Blind Spot Detection system for trucks: Design and implementation of a warning system

Michail Seretis MEng EngD

Project with DAF Trucks N.V., the Netherlands Title presentation: Design of a predictive control strategy for an automotive electrically-assisted waste heat recovery system with preview

Zhengyu Li MSc EngD

Project with Punch Powertrain Nederland B.V., the Netherlands Title presentation: Development of a simulation environment for a hybrid dual-clutch transmission system

Hazem Mohamed MSc EngD

Project with DAF Trucks N.V., the Netherlands Title presentation: Predictive ADAS functionalities to lower fuel consumption

Lazaros Kefalidis MEng EngD

Project with Eindhoven University of Technology, the Netherlands Title presentation: Systematic design of an intra-cycle fueling control system for advanced diesel combustion concepts.

Vincent Mazoyer MSc EngD

Project with BluePrint Automation, the Netherlands Title presentation: Computer vision platform for the localization and grading of deformable packaging

Caiyang Wei MSc EngD

Project with Bosch Transmission Technology B.V., the Netherlands Title presentation: Integrated energy and advanced thermal management system for hybrid electric vehicles.

Andreas Krivas MEng EngD

Project with VIBe, the Netherlands Title presentation: Cloud connected vehicles. Towards new business opportunities

Rameez Ismail MSc EngD

Project with NXP, the Netherlands Title presentation: Next generation lane centering Assist System

Gelila Negash Seifu MSc EngD

Project with TNO, the Netherlands Thesis title: An extendible software architecture for next generation multi-material AM platforms. Design and implementation of a recipe maker as testcase of the software architecture

Alumni 2016

The technological designer's program Automotive Systems Design organized a diploma award ceremony for the fourth generation of graduated technological designers on September 29, 2016. During a symposium all graduates presented their project results to the automotive industry, partners, supervisors from TU/e and industry, family and friends. In the afternoon the graduates received their diploma and the day was concluded with a dinner.

Vikram Sridhar, MSc EngD

Project with Flanders Make, Lommel, België. Title presentation: Structure and control co-design of a robotic manipulator - a design methodology

Asterios Pliatskas Stylianidis, MEng EngD

Project with Eneco, Rotterdam, the Netherlands. Title presentation: Control mechanisms for battery energy storage system performing primary frequency regulation and self-consumption optimization

Evangelos Stamatopoulos, MSc EngD

Project with DAF Trucks, Eindhoven, the Netherlands. Title presentation: Environment model creation and ADAS architecture for trucks. Design and implementation of a sensor fusion algorithm.

Edwin Ross, MSc EngD

Project with DAF Trucks, Eindhoven, the Netherlands. Title presentation: Heavy duty power train optimization with waste heat recovery

Brian Cano Martinez, MSc EngD

Project with DAF Trucks, Eindhoven, the Netherlands Title presentation: Advanced front-lighting system for heave duty trucks

Arjun Krishna, MSc EngD

Project with Punch Powertrain, Sint Truiden, Belgium. Title presentation: Analysis of CVT concepts

Khaled Emam, MSc EngD

Project with Punch Powertrain, Sint Truiden, Belgium. Title presentation: Modeling and control of a dual clutch transmission system - wet clutch lifetime estimation

Sivasubramanian Velayutham, MSc EngD

Project with TNO Automotive, Helmond, the Netherlands. Title presentation: Design of next-cycle & intra-cycle control for diesel combustion with multi-pulse injection

Christos Vichas, MEng EngD

Péter Bevíz, MSc EngD

Project with NXP, Nijmegen, the Netherlands. Title presentation: Top-down design and verification methodology for analog mixed-signal integrated circuits

Alumni 2015

The technological designer's program Automotive Systems Design organized a diploma award ceremony for the third generation of graduated technological designers on September 30, 2015. During a symposium all graduates presented their project results to the automotive industry, partners, supervisors from TU/e and industry, family and friends. In the afternoon the graduates received their diploma and the day was concluded with a dinner. 

Ivan Surovtcev, MSc EngD

Project with DAF Trucks, Eindhoven, the Netherlands Title presentation: Blind spot detection and passive lane change assist systems

Ashwin Dayal George, MSc EngD

Project with DAF Trucks, Eindhoven, the Netherlands Title presentation: Active lane keeping assist system

Thierry Kabos, MSc EngD

Project with DAF Trucks, Eindhoven, the Netherlands Title presenation: Auto docking: design and implementation for a semi-trailer truck

Dimitrios Maris, MEng EngD

Project with Bosch Transmission Technology, Tilburg, the Netherland Presentation title: Establishing of a verified theoretical model for the saddle height

Stefano Vignati, MSc EngD

Project with Bosch Transmission Technology, Tilburg, the Netherlands Title presentation: Development of squeeze film measurement system for push-belt pulley contact

Ioannis Konstantinou, MSc EngD

Project with Apollo Tyres, Enschede, the Netherlands Title presentation: Virtual tyre development: an automatic hexahedral tread mesh generator

Filip Cichosz, MSc EngD

Project with SKF B.V., Nieuwegein, the Netherlands Title presentation: Pinion unit preload measurement

Arash Khabbaz Saberi, MSc EngD

Project with TNO, Helmond, the Netherlands Presentation title: Functional safety methods for developing automated driving functions

Dimitrios Tzempetzis, Dipl.Eng. EngD

Project with TNO, Helmond, the Netherlands Presentation title: Towards a safety concept for cooperative automated driving

Preethi Ramamurthy, MSc EngD

Project with VIBe (Vehicle for innovation Brabant Electric), Eindhoven, the Netherlands Presentation title: An IoT architecture for cloud connected electric vehicles

Daniel Escobar Valdivieso, MSc EngD

Project with TNO, Helmond, the Netherlands Presentation title: Real time virtual NOx sensor for a heavy duty diesel engine

Rishabh Dev Sharma, MSc EngD

Project with TNO, Helmond, the Netherlands Title presentation: Development of an online friction estimator

Alumni 2014

The technological designer's program Automotive Systems Design organized a diploma award ceremony for the second generation of graduated technological designers on October 1, 2014. During a symposium all graduates presented their project results to the automotive industry, partners, supervisors from TU/e and industry and family and friends. In the afternoon the graduates received their diploma and the day was concluded with a dinner.

Tuan Ngo Ngoc, MSc MEng EngD

Project with Bosch Transmission Technology, Tilburg, the Netherlands Title presentation: Optimized Noise Behavior for Push Belt CVT

Jonathan Zacharia Vasu, MS EngD

Project with DAF Trucks, Eindhoven, the Netherlands Title presentation: Engine After-treatment Model Development and Integration on a Hardware-In-Loop-System

Anastasia Tegopoulou, MSc EngD

Project with TNO Automotive, Helmond, the Netherlands Title presentation: Bicycle-Vehicle Trajectory Prediction and Collision Risk Estimation for Advanced Driver Assistance Systems

Marinos Aspragkathos, MEng EngD

Project with VIBe (Vehicle for Innovation Brabant Electric), Eindhoven, the Netherlands Title presentation: A Systems Approach to define new Mobility & Smart Grid Services: The World's Smartest Grid Showcase

Mahmoud Ravanan, MSc EngD

Project with Benteler Engineering Service, Helmond, the Netherlands Title presentation: A Model based Software Development Methodology for High-end Automotive Components

Serkan Külah, Msc EngD

Project with TNO Automotive, Helmond, the Netherlands Title presentation: Transient Cylinder Pressure Sensor Estimator for Heavy-duty Diesel Engines

Alumni 2013

First graduates Automotive Systems Design

The technological designer's programme Automotive Systems Design organized a diploma award ceremony for the first generation of graduated technological designers on October 3, 2013.  During a symposium all graduates presented their project results to the automotive industry, partners, supervisors from TU/e and industry and family and friends. In the afternoon the graduates received their diploma and the day was concluded with a dinner.

Jubin Jacob, Msc EngD

Project with ABB, Eindhoven, the Netherlands Title presentation: Control algorithm improvements for an electric vehicle DC fast charger

Petra Zidkova, MSc EngD

Project with Bosch Transmission Technologies, Tilburg, the Netherlands Title presentation: Design rules for a low noise element sequence of the CVT Pushbelt

Hector Montemayor Ayala, MSc EngD

Project with NXP Semiconductors, Eindhoven, the Netherlands Title presentation: Advanced driving assistance systems for highly automated driving

Sebastiaan Voorderhake, MSc EngD

Project with Punch Powertrain, Sint Truiden, Belgium Title presentation: Development of an extended-range electric vehicle: a systems engineering approach

Hieu Trinh, MSc EngD

Project with TNO Automotive, Helmond, the Netherlands Title presentation: Development of a real-time in-vehicle human kinematics estimator

Jose Antonio Colin Navarrete, MSc EngD

Project with DAF Trucks Eindhoven, Eindhoven, the Netherlands Title presentation: Vehicle follow control function: supervisory and dynamic control; Design and proof-of-concept by rapid control prototyping

Dino Sepac, MSc EngD

Project with DAF Trucks Eindhoven, Eindhoven, the Netherlands Title presentation: Vehicle follow control function: Human-machine interaction; design and proof-of-concept by rapid prototyping