Publications

Journal

Wangler, T., Roussel, N., Bos, F.P., Salet, T.A.M. & Flatt, R.J. (2019), Digital concrete: a review  Cement and Concrete Research

Wolfs, R.J.M., Bos, F.P. & Salet, T.A.M. (2019), Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing  Cement and Concrete Composites

Wolfs, R.J.M., Suiker, A.S.J. (2019), Structural failure during extrusion-based 3D printing processes  The International Journal of Advanced Manufacturing Technology

Wolfs, R.J.M., Bos, F.P., Salet, T.A.M. (2019) Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion Cement and Concrete Research

Figueiredo, S.C., et al. (2019) An approach to develop printable strain hardening cementitious composites Materials & Design

Bos, F.P., Bosco, E., Salet, T.A.M. (2018) Ductility of 3D printed concrete reinforced with short straight steel fibers. Virtual and Physical Prototyping

Wolfs, R.J.M., Bos, F.P., Salet, T.A.M. (2018) Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete. Construction and Building Materials

Asprone, D., Menna, C., Bos, F.P., Salet, T.A.M., Mata-Falcon, J., Kaufmann, W. (2018). Rethinking reinforcement for digital fabrication with concrete. Cement and Concrete Research

Salet, T.A.M., Ahmed, Z.Y., Bos, F.P., Laagland, H.L.M. (2018). Design of a 3D printed concrete bridge by testingVirtual and Physical Prototyping

Wolfs, R.J.M., Bos, F.P., Salet, T.A.M. (2018). Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing. Cement and Concrete Research

Suiker, A.S.J., (2018). Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments. International Journal of Mechanical Sciences

Borg Costanzi, C., Ahmed, Z. Y., Schipper, H. R., Bos, F. P., Knaack, U. & Wolfs, R. J. M. (2018) 3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure. Automation in Construction

Bos, F.P., Ahmed, Z.Y., Jutinov, E.R., Salet, T.A.M. (2017). Experimental exploration of metal cable as reinforcement in 3D printed concrete.Materials

Wijffels, M.J.H, Wolfs, R.J.M., Suiker, A.S.J. & Salet, T.A.M. (2017) Magnetic orientation of steel fibres in self-compacting concrete beams: Effect on failure behaviour. Cement and Concrete Composites

Bos, F.P., Wolfs, R.J.M., Ahmed, Z.Y., Salet, T.A.M. (2016). Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printingVirtual and Physical Prototyping

Conference

Bos, F.P., Wolfs, R.J.M., Ahmed, Z.Y. & Salet, T.A.M. (2018) Large Scale Testing of Digitally Fabricated Concrete (DFC) ElementsFirst RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, held in Zurich, Switzerland

Salet, T.A.M., Bos, F.P., Wolfs, R.J.M. & Ahmed, Z.Y. (2017). 3D Concrete Printing – A Structural Engineering Perspective. High Tech Concrete: Where Technology and Engineering Meet. Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12–14, 2017

Wolfs, R.J.M., Bos, F.P., van Strien, E.C.F & Salet, T.A.M. (2017). A Real-Time Height Measurement and Feedback System for 3D Concrete PrintingHigh Tech Concrete: Where Technology and Engineering Meet.

Bos, F.P., Ahmed, Z.Y., Wolfs, R.J.M. & Salet, T.A.M. (2017). 3D Printing Concrete with ReinforcementHigh Tech Concrete: Where Technology and Engineering Meet.

Martens, P., Mathot, M., Bos, F.P. & Coenders, J. (2017). Optimising 3D printed concrete structures using topology optimisation. In M. Luković & D.A. Hordijk (Eds.), High Tech Concrete: where technology and engineering meet (pp. 301-309)

Martens, P.A., Mathot, M., Coenders, J.L., Bos, F.P., Rots, J.G. (2017) Optimising 3D printed concrete structures using topology opsimisationProceedings of the IASS Annual Symposium 2017.

Salet, T.A.M. & Wolfs, R.J.M. (2016). Potentials and challenges in 3D Concrete Printing. 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016) 16-19 May 2016, Singapore

Wolfs, R.J.M., Salet, T.A.M. & Hendriks, L.N. (2015). 3D Printing of Sustainable Concrete StructuresProceedings of the International Association for Shell and Spatial Structures (IASS) Symposium 2015, Amsterdam, The Netherlands

Wolfs, R.J.M. & Salet, T.A.M. (2015). An Optimization Strategy for 3D Concrete PrintingProceedings of the 22nd EG-ICE workshop 2015, Eindhoven, The Netherlands

Professional

Salet, T.A.M. (2018). The future of 3D printing and its applications, Concrete Plant International - 1

Bekkering, J (2017). Fire Wall – Bekkering Adams architectenARC17 Innovatie

Wolfs, R.J.M. & Salet, T.A.M. (2015). 3D Printen van betonconstructies: Onderzoek naar de mogelijkheden van een nieuwe maakmethode, Cement 7