prof.dr. C.W.M. (Cees) van der Geld - Expertise

Geld, prof.dr. C.W.M. van der
Address :
Technische Universiteit Eindhoven
P.O. Box 513
5600 MB EINDHOVEN
Chair :
Interfaces with Mass Transfer
Department :
Department of Chemical Engineering and Chemistry
Section :
Interfaces with Mass Transfer
Positioncategory :
Professor (HGL)
Position :
Full Professor
Room :
STW 2.35
Tel :
+31 40-247 2923
Tel (internal) :
2923
Email :
C.W.M.v.d.Geld@tue.nl
Section :
Proces- and Product Design
Positioncategory :
Professor (HGL)
Position :
Full Professor
Room :
STW 2.35
Tel :
+31 40-247 2923
Tel (internal) :
2923
Email :
C.W.M.v.d.Geld@tue.nl

Share / Bookmark

Expertise

  • D14210 - Technical mechanics
  • D14500 - Chemical technology, process technology
  • Boiling
  • Forces on bubbles and particles
  • Condensation

Biography

Career highlights 1990-present Technical University Eindhoven, associate professor two-phase flow 1987-1990  Technical University Eindhoven, Department of Mechanical Engineering, assistant professor two-phase flow 1985-1987 Delft University of Technology, Department of Aeronautical Sciences, assistant professor rocket propulsion 1981-1985 Ph.D. work (doctor of philosophy), Technical University Eindhoven. 1979-1980 Cap Gemini Nederland 1979  Master of Science, Pure Mathematics, Nijmegen University. 1979  Master of Science, Theoretical Physics, Nijmegen University. Research Phase transitional flows, in particular flows with boiling, condensation and steam injection. Quantification of added mass forces on deforming bubbles, free or attached to a plane wall. Theoretical and experimental determination of drag and lift forces during bubble detachment and particle motion, also in accelerated flows. Drainage and dropwise condensation in a compact plate heat exchanger. Intermittent steam injection, jet break-up and of turbulent dispersion Educational Supervisor of more than 100 Dutch Master of Science thesis works, about 7 on a yearly basis; supervisor of four Second Phase Certificates (TWAIO); supervisor and copromotor of more than 12 Ph.D. theses. Teacher of “Energieleer” and part of “Process technology” to second year undergraduates. Teacher of the course “Two-phase Flow with Heat Transfer” and of the course “Physical measurements principles” to master students. Organisational: 2009-present Officer of the Assembly of World Conferences on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics which organizes conferences and awards the Nusselt-Reynolds prize 2009-present Chairman of the Nusselt-Reynolds prize committee of the above Assembly 2008  Representative of Eindhoven University for the European Brazilian Window for exchange of students and staff mobility 2007-present Editor of Experimental Thermal and Fluid Science 1995-present member of various organization committees of conferences, f.e.the European Conference on Two-phase Flow Instrumentation and Modeling; viz. in Poland, ‘s-Hertogenbosch, Jamaica, China 1991-2002 Member of the standard committee ISO/TC 185/WG 1 Working group Two-phase flow Most recent subsidized projects 2013-2017 STW-project  12386 “Boiling flow regime maps for safe designing”, 2 Ph.D. students and 1 postdoc; sponsoring by Stork Thermeq and NEM; started 1-4-2013 2011-2014 STW-project 10717 "Boiling control in peristaltic ducts", 2 Ph.D. students; sponsoring by DAF and Spirotech B.V. 2011-2015 “Jet cooling of a hot moving plate”, 1 Ph.D. student at TUE; paid by CAPES, a governmental agency in Brazil 2009-present Project on endovenous ablation techniques, i.e. boiling in blood and steam injection in veins; cooperation of EMC (Erasmus, Rotterdam) and AMC, Amsterdam. MSc students, 1 researcher hired for 5 months, 1 researcher hired for 15 months 2008-2012 Project on turbulent dispersion of particles with inertia in pipe flow, 1 Ph.D. student